|
Model：QR-004
Size(L*W*H): 300-1200*90/125*12/15mm
Thickness of top layer: 2mm,3mm,4mm
Lacquer: UV treffert finish
Edge: Bevel, micro-bevel, square
Joint: Tongue and Groove(T&G)
Wood species: Red oak
Latin name: Quercus rubra, Q.cerris
Family: Fagaceae
Origin：North America
Wood Properties:
The sapwood of red oak is white to light brown and the heartwood is a pinkish reddish brown. The wood is similar in general appearance to white oak, but with a slightly less pronounced figure due to the smaller rays. The wood is mostly straight-grained, with a coarse texture;
Its density: 0.79g/cm3;
The wood is hard and heavy, with medium bending strength and stiffness and high crushing strength. It is very good for steam bending. Great wear-resistance.
Main uses:
Furniture, flooring, architectural millwork and mouldings, doors, kitchen cabinets, paneling and caskets.
Availability:
Readily available
|
